Can You Mix Pine Sol and Bleach [Laundry Experts Answer]

Published by Hala Zaqqout on February 27, 2022 | Last updated on May 14, 2023

“Can you mix pine sol and bleach?” is a question that arises in so many people’s minds.

You’ve probably heard that mixing certain household chemicals, especially cleaning solutions, can result in serious toxicity.

If you have a variety of cleaning products on hand, you might be wondering if combining a couple of them will result in a more powerful solution that can remove tough stains or disinfect problem areas more thoroughly.

It’s important to know what’s in any two cleaning products before combining them to ensure that they’re safe to mix together.

Pine-Sol and bleach are two of the most common cleansers found in most homes. It’s tempting to combine them to make a more powerful cleaning solution. Is this safe to mix? Can you mix Pine Sol and bleach?

In this Cleaners Advisor article, we’ll give you a brief answer to your questions “can you mix pine sol and bleach?” and will help you cope with the situation in the best way possible.

Table of Contents

Can You Mix Pine Sol and Bleach Together?

If you’re asking “can you mix pine sol and bleach?”, then the short answer of Cleaners Advisor team is NO! You shouldn’t mix Pine-Sol and bleach because it’s incredibly harmful. If you try to do so, it will be a physically painful and potentially toxic experience.

Some experts suspect that the harmful component within Pine-Sol could be glycolic acid, mixing chlorine bleach with acid releases hazardous chlorine gas.

Why You Should Not Mix Pine Sol and Bleach?

Can mixing pine sol and bleach together cause a harmful and poisonous effect? Absolutely, yes!

Chlorine gas irritates your mucous membranes (nose and mouth) and causes your eyes to burn and water in low concentrations. You will most likely feel dizzy or woozy.

What is worse, chest pain, lung pain, difficulty breathing, fluid in the lungs, and vomiting may occur if you are exposed to higher concentrations of chlorine gas.

This video below explains the fact that you should NEVER mix ammonia and bleach because their combination may lead to the formation of dangerous, potentially hazardous byproducts as a result of certain chemical reactions

What to Do if You Already Mixed Pine-Sol and Bleach?

First, you should take every precaution to avoid accidentally mixing Pine-Sol and bleach.

Store the cleaners separately, and don’t clean an area with a different cleaner until the previous one has completely dried.

It’s also important to use the appropriate safety equipment before disposing of the chemicals. Gloves are needed, but if you have them, goggles, masks, and long sleeves are ideal.

After using the bleach or Pine-Sol, you can wash the area with plain water to ensure no residual bleach or Pine-Sol is left behind.

But if you suspect you’ve accidentally mixed bleach and Pine-Sol, open windows, turn on fans and have some fresh air, especially if you’re feeling dizzy or your eyes and lungs are burning.

Cover your nose and mouth with a mask and return briefly to completely clean the affected surfaces with cool or warm water after allowing the air to wash through the space for a while.

But more importantly, Keep any mixed cleaning products, even little amounts, away from small children or pets. Children and pets are more susceptible to toxic fumes.

What Can You Mix with Pine Sol?

It’s not recommended to mix Pine Sol with any other product.

To use Pine-Sol properly, mix ¼ cup per gallon of warm water. Then, use a cloth or sponge, wipe the surface with the solution. Except when used on rubber or asphalt tiles, there is no need to rinse a surface after applying Pine-Sol.

Pine-Sol is primarily composed of water, with propylene glycol and benzoic acid serving as active ingredients. These acids eat away at dirt and grime while also killing bacteria.

There’s no need to mix Pine-Sol Original with other cleansers because it’s a great disinfecting cleaner that works well on its own.

Only the Pine-Sol original disinfects; the perfumed multi-surface cleansers are designed to cut through grease and filth but do not destroy viruses or bacteria on contact. Pine-Sol Original is effective against 99.9% of germs.

But if you want to mix Pine Sol with another cleaner, you can mix it with extra ammonia. It will help increase make it more effective in removing stubborn stains and especially dirty jobs. You can make a super-strong cleaning solution in only a few minutes.

What Can You Mix with Bleach?

In a nutshell, water is the only thing you should mix with bleach. mix bleach with any other cleaning product or chemical.

Bleach contains a lot of chlorine, which is toxic in its base form. For that, bleach is one of the most harmful cleaning products to mix.

Bleach, on the other hand, reacts badly with a lot of things, including ammonia, vinegar, urine, solid forms of chlorine, and many more.

It’s also pointless to combine bleach with any other product because it’s already a powerful formal. But once the bleach is diluted, you can add a little plain laundry detergent, which is designed to be chlorine stable, to 1 cup of bleach in 1 gallon of water.

Can You Mix Pine Sol and Bleach FAQ

Does Pine Sol kill mold?

Sanitizing chemicals like bleach or Pine Sol will not kill all of the mold spores. In fact, most disinfectants are only capable of stunting mold growth without killing the actual spore.

How long does Pine-Sol smell last?

The smell in our small apartment usually lasts for a few hours. It all depends on whether you dilute it with water or not. If you dilute it, the fragrance will last for the time mentioned above. If you are using Pine Sol alone, this can take up to 24 hours.

Can you use Pine Sol on tile?

All of them will leave your home smelling fresh and clean. It’s safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite.

To Wrap Up

You should NEVER mix pine sol and bleach together!

Mixing pine sol and bleach produces chlorine gas, which is potentially dangerous or poisonous. Never, ever do it!

For that, make sure you read all of this information thoroughly before you begin working with a chemical at your home or at your place of business.

Share your cleaning tips and tricks and let me know how you get on in the comments box below.