How to Get Blood Out of Carpet Fast & Easily in 2023

Published by Hala Zaqqout on May 8, 2022 | Last updated on January 9, 2023

Nosebleeds, cuts, kids running into walls or furniture, and whatever mishap caused the bleeding in the first place. Bloodstains in your carpet are terrible, but they aren’t the end of the world.

Luckily, your carpet isn’t permanently ruined. If you wonder how to get blood out of carpet, keep in mind that the sooner you act and use the correct materials and methods, the better.

 But if the blood stain on your carpet has time to set in on your carpet, it may be much more difficult to remove.

In this Cleaners Advisor guide, you’ll find different effective methods on how to get blood out of carpet. The good news? The stain-removal products you’ll need are most likely in your bathroom or kitchen pantry.

At the end of this article, you’ll find a few tips and tricks to follow if you really want to banish blood stains and keep your carpet in a good condition.  

---

Materials and Tools Needed to Get Blood Out of Carpet

1. Steel Brush

Steel brushes have robust bristles that help break up the bloodstain from the carpet fibers.

2. Spray Bottle

A spray bottle makes it easy to apply the mixture to the affected area.

3. Sponge

After applying the removal mixture, blot the area with a sponge.

4. Rag

A moist rag is used to clean the area.

5. Wet Vacuum

The mixture used to remove the blood is soaked up by a wet vacuum.

---

How to Get Blood Out of Carpet Easily?

With a little patience, you can totally remove the blood stains from your carpet, whether it’s a fresh or dried blood stain, using any of the eight methods on how to get blood out of carpet:

1. Fresh Blood  

The best situation is to remove blood from the carpet as soon as possible. If at all possible, avoid allowing the stain to set in. When blood stains are still wet, they are considerably easier to remove. Here’re some effective and easy methods you can use:

a. Blot

You must act quickly to avert tragedy when dealing with a new bloodstain. Begin by blotting the blood with a clean cloth or paper towel as much as possible. The most effective material is cloth, but if you’re scared of staining it, paper towels will suffice.

After all, you may need to change them out several times. Begin at the edges of the area and work your way inward. Rubbing the place will just cause it to spread deeper into the fibers.

b. Wet with Cold Water

Fill a spray bottle halfway with cold water and spray the blood lightly. Let it sit for a minute or two. A glass or other container can also be used to pour a small amount. Only use enough water to dampen the area; too much water can damage your carpet.

Instead of tap water, some homeowners choose to use club soda or tonic water. It’s unclear how the carbonated beverages remove stains, but they’re not hazardous to your carpet.

If blotting isn’t enough, invest in a wet vac or a carpet extractor with a small attachment. These will help in the removal of moisture and stains.

c. Salt Treatment

Salt is good for more than just popcorn!  It can be used to remove blood stains, especially if you prefer to clean your home with natural products. If the stain is still fresh and wet, mix together salt and cold water until thick paste forms.

Then, spread it out over the carpet until the stain is entirely covered. The blood will be drawn into the mixture by the salt’s powerful absorbent properties. Let it sit for 5 to 10 minutes. Then, using a spoon, carefully scrape off the paste remnants.

If the carpet is still dirty, repeat as needed, and if necessary, apply another stain treatment. After you’re done, vacuum the area to remove any salt particles.

d. Diluted Dish Soap

Use a small amount of liquid detergent after trying the salt method and failing. Mix one tablespoon liquid dishwashing detergent and two cups cold water in a mixing bowl. Apply the solution to the bloodstain with a white towel soaked in it.

Then, using a spray bottle, rinse the area with cold water. Blot it dry with a dry cloth. Blot the blood stain with the cloth till the soiled area has migrated from the carpet.

After that, wipe any remaining dishwashing liquid with cold water. When you’re finished, gently blot with a dry cloth.

e. Dry the Carpet

It’s time to dry the carpet after you’ve effectively removed the blood. Using a fan to dry a carpet is the fastest way. Allow it to run for a couple of hours, directing it towards the wet area of the carpet.

You can also extract moisture from the carpet with paper towels or a dry towel to speed up the drying process. Apply something heavy to the wet area and lay them across it to help squeeze the moisture out.

If your carpet takes too long to dry, blood may emerge if it was soaked in the padding. This will result in a fresh stain, which can be extremely frustrating.

f. Restore the Fibers

You may want to restore the carpet once it is completely dry and blood-free. This can be done by vacuuming the area to remove the fibers. You can also gently fluff the area with a toothbrush.

If the stain was large or there were several spots in a large area, you might want to use the vacuum. This will be more efficient and less time-consuming than sitting on the floor and scrubbing.

2. Dried Blood

Wondering how to get blood out of carpet when it’s dried? The process isn’t difficult but you must first scrape off as much of the dried blood as possible.

a. Shampoo and Ammonia

One of the most effective ways to remove blood from any surface is to use ammonia. It should, however, be handled carefully because it might harm or discolor silk or wool. It can also produce toxic fumes, so be careful when using it.

Although ammonia can be used alone, we prefer to start with detergent to get the process started. This can also shorten the time it takes for the ammonia to do its job, reducing the risk of damage.

Fill a spray bottle halfway with water and two teaspoons of shampoo. Liquid dish soap can also be used. Shake well before spraying the area and allowing it to sit for up to five minutes.

Pour one cup of water into another spray bottle and add one tablespoon of household ammonia. Then, shake to mix the mixture.

After that, use a cloth to blot the area dry before adding the ammonia. Allow the ammonia to sit for up to five minutes after spraying it on. Rinse with clean water by spraying it on and blotting it out after wiping the area dry.

b. Enzyme Cleaner

Enzymes are a type of natural enzyme that helps bacteria break down organic matters including vomit, urine, feces, and blood. As long as the enzyme-based cleaner is safe for carpets, you can buy it.

Follow the directions on the label to apply the product. These are usually sprayed directly on the stain and left to dry for a period of time. Then finish by washing and blotting the area dry.

You can watch this video below to know how exactly you can remove the blood stain from the carpet easily with using the methods mentioned above.

---

Tips on How to Get Blood Out of Carpet

Here we provide you with some tips on how to get blood out of carpet easily, make sure to check them out:

• Ammonia can emit harmful fumes, so use it with caution. It also becomes hazardous when mixed with bleach, so never use the two together. Wear gloves and a mask to protect yourself, and keep the room well-ventilated.
• Although enzyme cleaners work well, they should not be used on silk or wool carpets. The enzymes may break down the fibers as well as the blood.
• If none of the previous techniques work, a specific stain-removing solution must be used to remove the blood stain from the carpet.

In general, use and dosage guidelines must be strictly followed, and treatment should not take place on wet areas. Instead, allow the area to dry before applying the special chemical to the blood spots.

• • If the treatment leaves a mark on the carpet, it’s a sign that it’s dirty and needs to be cleaned. If the stain reappears after treatment, it’s likely that some stain-removing agent or stain residue remains in the carpet.

In this case, the area should be treated again using the above-mentioned guidelines.

• If you’re using a new cleaning product or stain remover on the carpet for the first time, make sure it won’t harm it. Color bleed, discoloration, bleaching, and dissolution all cause damage.

To avoid this, test both the cleaning agent and the stain remover on a stamp-sized area. This might be in a corner, under a radiator, or somewhere else.

---

How to Get Blood Out of Carpet FAQ

---

To Wrap Up

Here’s the good news about how to get blood out of carpet:  Most bloodstains (wet or dry) can be easily removed with materials found in your bathroom or kitchen.

If all of the aforementioned treatments fail to remove blood from the carpet, a professional carpet cleaning may be required.

Remember to test a small area before applying the solutions to the blood stain because these are harsher treatments that may damage your carpet.

If you want to add more tricks and methods on how to get blood out of carpet, share them in the comments box below!