Useful Tips on How To Clean Tiles at Home

Published by Ahmad Jamal on June 13, 2023

Tiles are a crucial component in most households as they offer a sturdy and appealing surface for floors, walls, and countertops.

Nonetheless, with time, accumulated dirt and grime can dim the look of the tiles and the grout lines.

In this CleanersAdvisor guide, you will find tips on How To Clean Tiles at Home effectively and maintain their appearance.

These tips will be useful for cleaning bathroom tiles or kitchen tiles with ease and efficiency.

Table of Contents

Sweep or Vacuum Regularly

Regularly sweeping or vacuuming tiles is the most effective way to keep them clean.

Doing this prevents loose dirt, dust, and debris from collecting and makes it easier to maintain and preserve the appearance of the tiles.

To avoid scratching the tiles, use a soft-bristle broom or a vacuum cleaner with a hard floor setting.

Use the Right Cleaning Solution

Looking to clean your tiles the right way? It all starts with choosing the right cleaning solution.

Avoid harsh chemicals and abrasive cleaners that can do more harm than good to your tiles and grout.

Instead, go for a gentle and pH-neutral cleaner that’s created specifically for cleaning tile surfaces.

Or, if you prefer a natural approach, mix equal parts of white vinegar and warm water for an effective homemade tile cleaner. Keep your tiles looking their best with the right cleaning solution.

Scrub the Tiles

First step in mastering How To Clean Tiles at Home, is by scrubbing the tiles.

Do you want sparkling clean tiles? Here’s what you need to do. First, make your cleaning solution.

Then, grab a soft cloth or sponge and focus on small sections of your tiles. Give each area a thorough scrub, paying extra attention to pesky dirt spots.

Got some stubborn stains? Don’t give up just yet – try gently scrubbing the area with a soft-bristled brush or an old toothbrush.

Keep at it until your tiles look brand new. With our tips, you’ll have a beautifully polished floor in no time!

Scrub the Tiles

Don’t Forget the Grout

Tiles are usually cleaned regularly, but often the grout lines are neglected and can become dirty and grimy.

Nevertheless, you can clean both the tiles and grout lines using the same cleaning solution. Scrub the grout gently using a soft brush or old toothbrush with the cleaner until all the dirt is gone.

To remove tough stains, create a mixture using baking soda and water. Spread the mixture over the grout lines, leave it for 10-15 minutes, and then clean with a scrub.

Rinse with Water

After scrubbing your tiles, it’s crucial to rinse them well to eliminate any cleaning solution residue.

Simply use a clean cloth or mop dampened with water and change frequently to ensure a thorough clean.

For an added touch, we recommend giving your tiles a final rinse with a mix of mild dish soap and water to eliminate any lasting vinegar scent from using a vinegar-based cleaner.

Say goodbye to any lingering cleaning smells and hello to perfectly clean tiles.

Dry the Tiles

After cleaning the tiles, it is crucial to dry them to avoid water spots and streaks. You can use a dry and clean towel or cloth for wiping the surface, or leave the tiles to dry naturally if feasible.

This is particularly significant for tiles that are dark-colored or have a glossy finish as they are more likely to show water spots.

Seal the Grout

To keep your grout looking its best, it’s important to give it a little extra protection. That’s where grout sealer comes in! After cleaning, it’s a good idea to apply a coat of sealer to shield your grout from pesky stains.

Plus, it’ll make future cleanings a breeze. Just be sure to read the instructions first, and make sure your grout is totally dry before you get started. Trust us, your grout will thank you!

Regular Maintenance

To keep your tiles looking their best, it’s important to maintain them regularly. This includes sweeping, vacuuming, and deep cleaning.

Additionally, wiping down the tiles with a damp cloth or sponge on a daily basis will help eliminate any dirt or debris. This simple step is essential to maintaining the appearance of your tiles.

Regular Maintenance

Tackle Mold and Mildew

A simple solution to deal with mold and mildew on tiled surfaces in humid areas like bathrooms and kitchens is available for those who are struggling.

To make a cleaning solution, combine one part bleach with four parts water.

Apply this mixture to the affected areas by spraying it. Let the solution sit for a minimum of 10 minutes. Then, use a soft brush or cloth to scrub the area gently. Finally, rinse the tiles with water. You will notice that your tiles look as good as new.

Know When to Call a Professional

Don’t let stained, damaged tiles and crumbling grout get you down. Regular cleaning and maintenance can help, but sometimes you need to call in the experts.

A professional tile and grout cleaning service can get your floors looking like new again in no time. Don’t hesitate to reach out if you need to restore your tiles to their former glory.

Conclusion

Looking to keep your home’s tiles looking their best? Then check out these simple but effective tips!

By cleaning your tiles regularly and using the right cleaning solutions (don’t forget about the often-neglected grout!), you can keep your floors looking clean and fresh for years to come.

Why let grime and dirt detract from the beauty of your home’s interior when a little effort can go a long way to keep everything looking beautiful?

Here’s a video on how to clean tile at home