How to Clean Jetted Tub with Dishwasher Tablets

Published by Hala Zaqqout on May 24, 2022 | Last updated on May 14, 2023

After a long day at work or a staycation, no matter how spa-like you want your hot tub experience to be, it’s not always the case.

For a variety of causes, such as hard water deposits or grime, these tubs can become extremely filthy. But the dirt that gets into the water from the jets is far more serious.

For that, CleanersAdvisor has made an effort to provide the best guide on how to clean jetted tub with dishwasher tablets using one of a variety of household and store-bought products so you can enjoy relaxing in the jetted tub.

Then, you’ll find a few tips and tricks on how to clean jetted tub with dishwasher tablets. No more black gunk or nasty bacteria contaminating your bath water and ruining your self-care time.

Table of Contents

Why Should You Clean a Jetted Tub?

Remember that germs, mold, mildew, and gunk can accumulate in bathtubs. All of the body oils, soaps, and bath bubbles you use regularly contribute to the build-up.

Along with grubbing up your bath water, those germs might get inside your body and cause health problems.

Consider how colossally unhygienic it is to relax in a filthy bathtub that isn’t cleaned regularly. It’s impossible to enjoy the therapeutic benefits of a jetted bathtub if it’s not clean.

How Often Should You Clean a Jetted Tub?

Nasty Whirlpool — Courtesy of “structuretech.com”

It depends on how often you use it; regular use requires monthly jet cleaning. However, we recommend at least every five uses. Of course, you should clean the tub’s surface and interior once a week, just like the rest of your bathroom.

How to Clean Jetted Tub with Dishwasher Tablets?

It is not difficult to clean a jetted tub, but it does take some time. Fortunately, most whirlpool tubs can be cleaned using items from your pantry and cleaning supplies cabinet.

Materials and Tools Needed

how to clean a jetted tub 5073242 03 bd9566bc95f249828b81c42639e1a167 — Courtesy of “thespruce.com”

Measuring Cup
Toothbrush or Bottle Brush
Sponge
Dishwashing Liquid
Microfiber Cloths
Small Bowl
Bucket
Distilled White Vinegar
Baking Soda
Chlorine Bleach
Automatic Dishwasher Detergent (Powder or Liquid)

Follow CleanersAdvisor step-by-step guide to cleaning this relaxing bathroom staple so you can soak sans stress — or germs:

1. Wipe any visible debris or hair from the rim and inside of the tub with a damp sponge or microfiber cloth.

2. Fill the tub with hot/warm water until all of the jets are covered by about two inches. Then, as you’re filling, add one dishwasher tab to dissolve it. Pour about 1/2 gallon of white vinegar.

3. Turn off the air-induction valves to the jets unless the manufacturer says to leave them open. This forces the water and cleaning solution to circulate only through the tub’s internal plumbing, resulting in a more thorough cleaning.

Turn the jets on high for 15 minutes. The debris from the internal plumbing will start to wash into the tub.

4. Drain the tub and turn off the jets. Scrub any tub rings or wipe away any debris sticking to the tub with the long-handled scrub brush. Drain the water.

5. Allow 10 minutes for the baking soda to dissolve in the tub. Use an old toothbrush or small bottle brush to scrub and clean the interior surfaces of each jet. (If you do this every week or two, it should just take a few minutes.)

6. Using a pitcher or a large cup/small bucket, rinse the cleaner (or a shower spray if your tub has one.)

7. Allow bleach or bleach-free disinfectant spray to sit for a few minutes in the jets and around the drain and overflow valve. Use an old toothbrush to scrub the sprayed areas.

8. Rinse the tub once more.

9. Use an all-purpose cleaner to clean around the trim and fixtures.

If you want to know exactly how to clean jetted tub with dishwasher tablets, watch this video below.

Top Tips for How to Clean Jetted Tub with Dishwasher Tablets

Take a long relaxing soak now that your tub is gleaming clean. Follow these tips and tricks to keep your tub clean for longer:

1. Once you have the jets cleaned, regular cleaning will keep them in good condition.

2. Bath oils and bubble baths should be avoided since they leave residue in the jets that can serve mold and mildew.

3. Never use an abrasive cleaning on the tub since it can leave minute scratches that capture dirt and leave the finish looking dull.

4. Use an automotive wax suited for plastics on the tub’s walls to restore dull finishes. The tub floor should NEVER be waxed. This is a slip-and-fall hazard.

How to Clean Jetted Tub with Dishwasher Tablets FAQ

How to clean yellow jets in a whirlpool tub?

Fill your tub with hot water until the highest jet is reached. Pour half a cup bleach and two tablespoons of any detergent into the water to finish. Drain the tub after 10 minutes of running the jets.

How to get black mold out of my jacuzzi jets?

A mixture of vinegar and hot water can be used to remove black mold from jacuzzi jets. Fill the tub with hot water until the highest jet is reached, then pour in half a gallon of vinegar and soak for 15 to 20 minutes. Then drain and refill the tub.

Why are my bathtub jets not working?

The pump is frequently the cause of bathtub jet failure. By opening the access panel and the airlock valve, this can be easily rectified. This will help in the release of air and pressure from the pipe, allowing the water to flow again.

What is the best jetted tub cleaner?

Baking soda, dishwashing powder, and vinegar are three of the most effective and safe tub cleaners.

To Wrap Up

Now that you know how to clean jetted tub with dishwasher tablets, your tub should be sparkling clean once again.

But it’s necessary to clean your bathtub’s jets REGULARLY to ensure that they continue to function properly and that you’re bathing in clean water rather than gross germs.

Still have any questions about how to clean jetted tub with dishwasher tablets? Leave it in the comments box below and we’ll get back to you as soon as possible!