Is Pine Sol Safe for Marble Floor- Full Answer

Published by Hala Zaqqout on June 5, 2022 | Last updated on May 20, 2023

“Is pine sol safe for marble floor?” is a question that arises in so many people’s minds when cleaning their marble floors.

Pine sol is a powerful multi-surface cleaner that can be used on various surfaces but not all types of floors because it contains acids that can react to some types and cause them to deteriorate and corrode over time.

In this Cleaners Advisor guide, we’ll give you a brief answer to your question “is pine sol safe for marble floor?” and will help you cope with the situation in the best way possible.

We’ve also covered a similar guide like “can you mix pine sol and bleach together“, make sure to check it out.

Table of Contents

What is Pine Sol?

It’s a powerful multi-surface cleaner and an EPA-registered disinfectant that kills 99.9% of viruses and bacteria. It can be used on hard, nonporous surfaces from stoves to sinks, tile to wood floors, showers to toilets, and dumpsters to garbage cans ⁽¹⁾.

This multi-surface cleaner helps to remove dirt, soap scum, grease, rust, and hard water stains. On top of that, it doesn’t just mask odors, it wipes out odor-causing bacteria.

For more information about pine sol and its uses, watch this video below.

Is Pine Sol Safe for Marble Floor?

surfaces marble 1200x900 1 — Courtesy o “how to cleanthings.com”

If you’re asking “is pine sol safe for marble floor?”, then the short answer of Cleaners Advisor team is NO!

You should NOT use Pine-Sol to clean marble floors because it’s incredibly harmful. If you try to do so, it will be a physically painful and potentially toxic experience.

Marble floor will be stripped of their coating if you wipe them down with Pine-Sol because contains sodium secondary alkyl sulfate, propylene glycol, and benzoic acid, which has a corrosive effect on these materials ⁽²⁾.

Why You Should NEVER Use Pine Sol for Marble Floor?

Like any other cleaner, you might make a mistake when cleaning with Pine-Sol. While you can safely apply it to many types of surfaces, you should avoid using it to clean marble floors since there’s a risk of rubbing off the floor’s finish.

Here are the reasons why you do not want to use pine-sol on your marble floor:

1. It’s Acidic

Pine-sol contains acids that can react to the marble and cause it to deteriorate and corrode over time. The only way to fix this is to use a neutralizing agent like baking soda and thoroughly wash the marble after applying it.

For some marble types, depending on how much of an effect there was from applying pine sol at first, this can take many hours, making it impracticable.

2. It Will Scratch the Marble

Pine-sol also contains some pretty abrasive ingredients. This means that if you use it on your marble countertops or flooring by mistake, it would almost certainly harm the surface and scratch it.

This might make your marble surface lose its new, fresh look and start to look old.

3. It Will Dull the Finish on Marble

Marble, like all other natural stones, is typically polished to protect it from daily wear and tear. If you’re not careful while using harsh chemical cleaners like pine-sol on the surface, this finish can quickly be dulled or removed.

And you don’t want your marble’s polish to be compromised because it serves as protection for a vulnerable surface. It could lead to permanent damages in most cases.

4. It Can Permanently Etch the Marble

Furthermore, if Pine-sol is left on the stone for too long without being cleaned away with water or a neutralizing solution like baking soda, it will permanently etch into the surface.

As the pores in the stone open up, making it more vulnerable to stains, which is not only bad for your marble but also bad for your installation. For that, you should wipe away the spill off of your floors or countertops as soon as possible with a damp cloth or towel.

5. It Can Discolor the Marble Surface

Pine-sol can cause a marble surface’s sealant to weaken, making it more prone to stains. If you have a costly natural stone and don’t want the chemicals in pine sol to harm it, this is a problem.

If you’re not sure how effectively pine-sol will adhere to your marble floor or countertop, the best thing to do is avoid it entirely. Because marble is a porous material, it is a delicate stone to work with.

Is Pine Sol Safe for Marble Floor FAQ

Does Pine Sol kill mold?

Using sanitizers like Pine Sol will not eliminate all mold spores. In fact, most disinfectants can merely slow down mold growth rather than killing the spore.

How long does Pine-Sol smell last?

The smell in our small apartment usually lasts for a few hours. It all depends on whether you dilute it with water or not. If you dilute it, the fragrance will last for the time mentioned above. If you’re only a Pine-Sol, it could take up to 24 hours.

Can I use wax on marble floor?

Some people use wax on marble to polish and protect it, but it can also create discoloration, particularly if the marble is white. First, try alternative methods to get the best results.

To Wrap Up

You should NEVER use pine sol on your marble floor!

Pine sol contains acids that can react to the marble and scratch it, which is potentially dangerous or poisonous. Never, ever do it!

For that, make sure you read all of this information thoroughly before you start working with a chemical at home or at work.

Share your marble cleaning tips and tricks with Cleaners Advisor and let me know how you get on in the comments box below.